A Cricut, a Silhouette or a laser cutter doesn’t see a picture the way you do. It follows paths: lines with a start and an end that the blade or the beam can trace. A PNG or a JPG is a grid of coloured pixels with no paths at all, so before you can cut a logo you need a vector file, usually an SVG.

This guide walks you through turning a PNG logo into a clean SVG with our free PNG to SVG Converter, and what to check before you cut.

Start with the best image you have

The converter traces the edges it can see, so the cleaner the image, the cleaner the paths:

Use the largest version of the logo you can find. A 2000-pixel-wide file traces far better than a 300-pixel thumbnail from social media.
Prefer flat colours. Logos, clip art and line drawings convert well. Photos with gradients and shadows turn into hundreds of tiny shapes that are hard to cut and weed.
Avoid heavy JPG compression. The blocky noise around letters in a compressed JPG becomes jagged edges in the SVG.

The converter accepts PNG, JPG, WEBP, BMP and GIF files up to 25 MB. The image is processed in your browser and isn’t uploaded to our servers, so it’s safe to use with a client’s logo.

Pick the right image type

The first choice in the converter sets sensible starting values for the kind of artwork you have. You can change every value afterwards.

Logo / Clip Art: flat colours and crisp edges. The right choice for most business logos.
Sketch / B&W: line art and two-tone drawings.
Silhouette: a single colour. Use this for single-colour vinyl, stencils and most laser cutting, where every shape is the same material.

Remove the background and keep only the colours you need

A white or coloured background would otherwise become one big rectangle in your cut file. Remove it, then look at the palette: every colour the converter finds becomes its own layer. If a colour is only an artefact (a thin grey halo around black letters, for example), remove it with the × so it’s left out of the file entirely, not just hidden.

Separate layers matter for vinyl: each colour is cut from its own sheet, and with one layer per colour your machine software can cut them one after the other and you can stack them in order.

Check the result before you cut

Zoom in on the preview and look at three things:

Letter edges should be smooth curves, not stair steps. If they’re jagged, start from a larger image.
Small details such as the inside of an “e” or “a” should be real holes, not filled in.
Tiny specks should be gone. Every speck is a separate shape your blade will try to cut.

Then download the SVG and open it in Cricut Design Space, Silhouette Studio or your laser software. Set the size there and you’re ready.

Sizing, weeding and thin lines

A path that looks fine on screen can still be hard to cut if it’s tiny. As a rule of thumb, very thin lines and small letters are the parts that tear or lift during weeding, so make the design bigger or use a bolder version of the logo for small decals. If you’re making lettering for a window, a wall or a vehicle, our Vinyl Decal Builder checks whether a design will cut and weed cleanly at the size you choose, and gives you true-size cut files for Cricut, Silhouette, Brother or any vinyl plotter.

When to start from the original file instead

Tracing is the best option when a PNG or JPG is all you have. If the logo was made by a designer, ask them for the original AI, EPS, PDF or SVG file. A vector file made by the designer keeps their exact curves, which is always better than a trace.

Need it printed or cut for you?

If you’d rather not cut it yourself, we print stickers, labels and decals, including window decals and vehicle decals, and ship across Canada and to 47 countries. Send your SVG with the order, or get in touch through our contact page.